Hi,In fact, NAT only works when packets pass through both "nat inside" and "nat outside" configured interfaces.When you try to access 81.x.x.10 from inside your network, packets never pass through the outside interface and no address translation occu...

Hello,You can try to remove the access-group 101 on the Ethernet 1/0 interface and to configure it on the dialer1 interface. I think it will work better.Regards,Tanguy

Hello, The 2500 series router don't support pppoe client features. You cannot connect a DSL modem on a 2514.The 2500 support VPN but only with a DES encryption.I think that the soho series routers is the best and cheaper solution for you. These route...

I already had this problem with DSL connections using PPPoE. Some web sites worked correctly but some others ones were unreacheable. I solved it modifying MTU parameters. A tech note is available about this problem on http://www.cisco.com/warp/public...

This feature is available on many platforms, but unfortunately not on 1750 series router. You can check the hardware/features compatibility matrix with the feature navigator tool:http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp .Choosing the "IEEE 802....