Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Which of the following authorization commands are valid? (Choose two.)A. aaa authentication exec home radiusB. aaa accounting exec home radiusC. aaa authorization default noneD. aaa authorization exec home radiusE. aaa authorization network default e...
Below are the model number of 3com switches that we are going to use with our 3550 12G having 1000base SX modules. 3Com Baseline Switch 2226-24 Port 3Com Baseline Switch 2250-48 Port 3Com 1000Base-SX SFP Transceiver Cisco 3550 12G will be a core swit...
Below are the model number of 3com switches that we are going to use with our 3550 12G having 1000base SX modules.3Com Baseline Switch 2226-24 Port 3Com Baseline Switch 2250-48 Port 3Com 1000Base-SX SFP TransceiverCisc...
I am getting these messages from pix to the syslog servers.I want to make sure what these messages are for???I get alot of these messages (%PIX-2-106006).Can somebody explain me and if there is action to be taken?192.168.1.13 = IP address on outside ...
KevinPlease check the configurations I am going to do for cisco 3550 for VLANS: As i told you i'll be having 3 or 4 vlans and then 3550 will be doing intervlan routing1. vlan database2. vlan 2 name servers3. vlan 3 name clients4. vlan 4 name wireless...
KevinWhat if the request from vlan2 is destined to vlan3? will the layer 3 routing can forward the request to vlan3 from vlan 2 and get the reply back to vlan 2 from vlan3.... keep in mind there is no trunk.
Kevinthese 3com switches are unmanaged and we can not configure them for trunking.only possiblity is to make vlans from the core 3550 switch.Do you think intervlan routing is possible.if you check the post from Scott he said its possible by layer 3 r...
Hi ScottNow I am having much clear idea what you said.From the core: one GBIC port is extened for one vlan and it has only one 3com switch (NOT TWO so no point of having broadcast storm).and I'll enable layer 3 routing on the cisco switch so that vla...
What if I enable layer 3 routing (IP ROUTING) on Cisco 3550? Will these vlans able to communicate with each other or not?My idea is to have servers in one vlan and clients in another vlan and some wireless clients in anothe vlan and then let all clie...
