About RickS03

RickS03 · 06-15-2019

I've got an old Cisco 891 with two SSIDs configured. Both SSIDs are assigned to Dot11Radio0 and Dot11Radio1 Right now, it looks like Dot11Radio0 is on one channel: channel 2462and Dot11Radio1 is on a different channel:channel 5240 I'm wondering what ...

RickS03 · 03-07-2018

Hi, I'm runnig a Cisco 891W: Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.2(4)M6, RELEASE SOFTWARE (fc2) ROM: System Bootstrap, Version 12.4(22r)YB3, RELEASE SOFTWARE (fc1) Cisco 891 (MPC8300) processor (revision 1.0) with 4986...

RickS03 · 03-08-2018

I think that does it. I know how to get DHCP and what not working. I just needed to understand that i could use that port in a non-redundant mode. BTW, you're correct, it doesn't support being in a vlan (which I think is what initially threw me).

RickS03 · 03-08-2018

I hadn't expected it to work with DHCP either, I just included that for completeness. That's why I also said what I'd tried with static addressing. Yes, adding a new subnet to the interface, and a new static IP address to the laptop gives me a work...

RickS03 · 03-08-2018

Fa0-7 are switch ports. Gi0 is the external interface, and the device is definitely routing. However, if I hook a device to Fa8, it doesn't get an IP address from the internal DHCP (on device) or external DHCP (external network), and can't ping gatew...

Member Since	‎03-07-2018 09:12 AM
Date Last Visited	‎06-19-2019 12:35 AM
Posts	5

User Statistics

User Activity

channels for multiple SSIDs on the same device

2 WAN ports on the Cisco 891W

Re: 2 WAN ports on the Cisco 891W

Re: 2 WAN ports on the Cisco 891W

Re: 2 WAN ports on the Cisco 891W