Hi Community,we are trying to achiev following scenario. Active/Passive PaloAlto Firewall connected to ACI Multipod with routed ports and BGP. We need routed ports as Multicast is not supported with our ACI version. Currently we use version 5.2(6e). ...
Hi all,is it possible and recommended to connect a active/passive firewall (Cisco Firepower) with a L3Out to Cisco ACI without SVI? Instead of SVI we want to use routed port because we need multicast support on this L3Out. Multicast over SVI is not s...
Dear all, is it possible to declare Leafs for testing? So that no alerts will be raised in the ACI environment for these specific leafs? Thanks,Philipp
Hello Community, I have a ASA with a local VPN Pool where the VPN users get their IP-address. Is it possible to advertise this network in the bgp process? Thanks and regards,Philipp
Hello Community,I´m not able to register my ASA with Firepower at the FMC after I deleted the device. Following error message at the FMC: FMC: pigtail | grep -IP MSGS: 12-18 09:32:42 ifs-fire-v1 SF-IMS[5083]: [5083] sfmgr:sfmanager [INFO] set peer PE...
Hello Marvin, yes. I already tried to delete and add the manager without success. But meanwhile i solved the problem. I made manually an update of the Firepower instance of the ASA. After that i was able to register the device in the FMC again. I fo...
Hi Anthonylofreso ,thanks for the fast reply. Unfortunately we don´t use the Guest Portal on ISE for this authentication. Were just checking if the credential are correct and grand then access to the wifi (ISE is only RADIUS Server for the wifi locat...
Hi Paul,thanks for the detailed information. But I think that our phones do not support EAP Proxy Logoff.... :( Yes, the PCs behind the phones doing 802.1x. So we have to look for the inactivity timer. Again thank you very much for the support!
For...
