About roblyon

roblyon · 11-18-2004

hey guyscan someone pls take a look at this config in my 515 and tell me why i cant ping from host 10.2.1.20 (connected to inside interface) to host 10.3.1.20 (connected to dmx interface)..thanks PIX Version 6.3(3)interface ethernet0 autointerface e...

roblyon · 11-18-2004

Has anyone else noticed the Chemtrails in the side picture of the PDM 3.0(1) Startup Wizard?Are they suppost to be Chemtrails? or something else entirely? perhaps something artistic?CheersRob

roblyon · 11-17-2004

Hi guysI would appreciate a hand with a problem i am having with a setup in a lab environment. Im sure there is something really simple i have missed.. perhaps you know what it is.The basic problem is this, from a host in "Location A" i can ping any ...

roblyon · 08-26-2004

hey fellasi have a 828 curerntly configured with an atm interface that gets a single public ip thru a dialer interface with ip address negotiated set.this nats to a pix and from there i forward packets based on port.i am upgrading from a /31 subnet t...

roblyon · 11-19-2004

hey joe,thanks for your reply.this is what i actually ended up doing originally  i have used the echo reply plenty of times before for the outside interface, i had just forgotten to do so for the inside interface and couldnt for the life of me figur...

roblyon · 11-18-2004

from what i am presuming of your situation, you need to pat out the outside interface of your firewall for your reply address to be that of the outside interface and not your routers public ip.ip address outside 61.xx.xx.242 255.255.255.248 (pix outs...

roblyon · 11-18-2004

there is to be no doubting that you are the man scott much appreciate your assistance again today.cheersrob

roblyon · 11-18-2004

perhaps im reading a little to much into it.. but are cisco saying something about chemtrails? even with that big brick wall there, you're still going to get screwed by big government..?even the people in the picture seem to have an errie aura around...

roblyon · 11-17-2004

Hi Scott,Thanks for your reply. It answered my question about why it would not work ;), i will check out the link you have provided.thanks also to partick for your time.cheersrob

Member Since	‎08-25-2004 10:38 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	10

User Statistics

User Activity

cant ping into dmz subnet from inside subnet

Chemtrails in the Cisco PIX Startup Wizard

Lab Environment, IPSEC VPN Works, but cant ping Interfaces

29 subnet, 828router and a 501pix config tips needed

Re: cant ping into dmz subnet from inside subnet

Re: whatismyip.com is showing router address instead of firewall

Re: cant ping into dmz subnet from inside subnet

Re: Chemtrails in the Cisco PIX Startup Wizard

Re: Lab Environment, IPSEC VPN Works, but cant ping Interfaces