Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm new to networking and using Packet Tracer to setup a simple network. When I changed the management vlan from vlan1, I no longer can ping the management vlan.
The network comprises of:
- 1941 router
- 2960 switch
- PC
First, I configured the...
I hope to understand your question. The trunk port will not show under vlan 186 using the "sh vlan" command. Trunk ports will show up using "show interface trunk" command.
Router#sh ip route
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.0.0.0/8 is directly connected, GigabitEthernet0/0
L 10.10.10.30/32 is directly connected, GigabitEthernet0/0
Please bear in mind, I am using Packet Tracer and the setup is very simple network. The configuration are mostly default setting. I did not changed nor played with the native vlan.
Router#sh run
Building configuration...
Current configuration : 616 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Router
!
!
!
!
!
!
!
!
ip cef
no ip...
