Dear All,We are running MPLS core network consiting of quite a few PE routers and some P routers in MPLS core network.We need to implement QoS traffic filtering based on destination IP address (using ACL in match statement under class map) and apply ...
Hi,I have got a weird problems with one route being present in the VRF however it is not present int the mpls forwarding table: Below are the outputs:sh ip route vrf custU 10.0.6.0 [1/0] via 1.1.1.1C 1.1.1.1/32 is directly connected, Virt...
Hi,I have recently purchased ASR1002-RP1-ESP5 with 2 x 4K Broadband licenses to be used as LNS. Cisco have sent me PAK files for the licenses however when I try to enter the licenses into the device I get an error message saying that Licensing is not...
HI,Due to a bug int the IOS (F4 loosing routing information) i needed to upgrade the IOS from 15.0.1-M4 to the latest one which is 15.1.Is it ok to do without valid Smartnet contract? Cisco website allowed me to download the IOS and then put it on th...
Hi,I am looking to upgrade part of our core network to ASR1002 routers. Does anyone have any experience with these products? They are relatively new and there is not much about their reliability on the Internet.We are planning to use those as our tra...
Cisco IOS: c7301-js-mz.124-23.bincust5#sh ip cef vrf cust 10.0.6.010.0.6.0/24, version 114, epoch 0, cached adjacency to Virtual-Access4800 packets, 0 bytes tag information set local tag: VPN-route-head via 83.218.131.183, 0 dependencies, recurs...
check for file restrictions for .exe files. Some software/firewalls do not like .exe files as they are deemed as viruses. Even outlook will not allow you to send .exe file and it will block it as unsafe attachment.
HI Richard,Sorry about not being too clear on what the problem was. Basically we experienced exactly the same problem as per the original post.We have BT Hatteras box which is hard set to duplex full and speed 10 and we want to connect Cisco 881 to i...
HI,We are experiencing exactly the same problem. It seems that it's not the modem which is to blame but the Cisco 881 router.We use 2 different type of routers to connect our customers to BT. Cisco 1841 which works perfectly fine and Cisco 881. The r...