About zac192000

zac192000 · 02-27-2012

I am actually going to setup my ASA 5505 with two different outside ISPs such that half of inside lan networks will be natted into 1 ISP and other half of the inside lan networks will be natted into other ISP ,so this means1.1.1.1/24 is our one ISP2...

zac192000 · 02-13-2012

Iam moving our current network infrastructure from our current building to our new building such that both offices run parallel with each other with the same ip scheme on both locations.M confused what will be the routing scheme such that when ip 192...

zac192000 · 03-20-2012

Im not seeing any nat exemption from site A to site B.Is it possible to send traffic across the tunnel without nat exemption?

zac192000 · 03-11-2012

And use the correct subnet mask....I have written a different subnet mask in my first post and you ate using a different one....Just make sure....ThanksSent from Cisco Technical Support iPad App

zac192000 · 03-11-2012

No the statements that I send to you is for the traffic that is initiating from voice zone to voice zone and from inside zone to inside zone...One thing you need to make sure....If your requirement is to NAT the traffic from inside to voice then you ...

zac192000 · 03-10-2012

Static(inside,inside) 10.10.0.0 255.255.255.240 10.10.0.0 255.255.240.0Static(voice,voice) 172.16.20.0 255.255.255.0 172.16.20.0 255.255.255.0Sent from Cisco Technical Support iPad App

zac192000 · 03-01-2012

Hi I have two very important questions?..Can we make layer 2 VPN across the Internet with help of L2TPv3 just as we make IPSEC VPN?Which devices will support L2TPv3?I am still confused how L2TP is different from IPSEC?Sent from Cisco Technical Suppor...

Member Since	‎02-13-2012 08:01 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	13

User Statistics

User Activity

ASA with two default gateways

point to point connection with same subnet

Re: VPN w/overlapping networks

Re: ASA 5510 with Static VLAN NAT

Re: ASA 5510 with Static VLAN NAT

Re: ASA 5510 with Static VLAN NAT

Re: point to point connection with same subnet