About Carlos190

Carlos190 · 03-13-2012

Hi,I´ve had a question for a while, I wanted to find a way to use include and exclude on a command at the same time. The closest I´ve been to it was in a CatOS issuing the command sh run | in (set span | ex set spantree) and the objective was to show...

Carlos190 · 03-19-2012

Thanks for replying, I want to understand the reason why to issue a ping or traceroute from a Nexus has to include now the command vrf. Eg: ping x.x.x.x vrf management - in the case of the network I work at.

Carlos190 · 03-19-2012

Hi,Could you please explain about the use of vrf in Nexus, why is it necessary for issuing ping and traceroutes among others, and whether you know the reason why it was designed that way in Nexus.Thanks

Carlos190 · 03-05-2012

I see, then it would be interesting to see the output of a debug arp command if it´s supported by your switch, as always recommended, if you are going to issue that command be careful of not doing it when the switch already has a lot of work to do be...

Carlos190 · 03-01-2012

5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 63000 bits/sec, 51 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 fr...

Member Since	‎10-11-2011 08:12 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	5

User Statistics

User Activity

Using pipe to filter results - advanced -

Ask the Expert: LAN Switching

Ask the Expert: LAN Switching

Re: MAC Address not captured on switch ports

Re: MAC Address not captured on switch ports