Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have inherited a 5510 cluster in an Active-Passive cluster.
Occasionally, I see the CPU spikes to 70%+, which is well above what is normal for traffic flow at any time. So far my only clue has been that the Failover ethernet link jumps from 1-1.5Mb...
I want to NAT traffic to only destinations that are recieved as BGP routes (Any BGP routes will do, not just a particular neighbour).RTR1 has 3 connections, LAN1 (10.3.0.1/24) and 2 WAN connections with BGP peering on WAN1 connection for some specifi...
I'm using a ata-186 with SCCP across a WAN link. I have the LBRCodec set to 3 so that G729 can be used. My problem is that I cannot find any way to stop G711 from being selected first. There appears to be no documentation on forcing an ephone to use...
Hi Peter,Unfortunately I could not match the next hop as they were both the same (i.e. the next hop for both the static and bgp sourced locations was the LAN1 interface on RTR1.I tried using the match as-path which didn't work, tagging the routes unf...
The bug still exists in P00307020200 but only occurs occasionally I'm told. There is a new 7960-7940 firmware coming out which fixes the problem completely, however it hasn't been released to the public yet because Cisco is still testing some other f...
Can you post a link or the information you found about the codec selection for SCCP?Also, the parrallel hunt group appears to be seperate to the ephone hunt groups and only seems to be for SIP.
