Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
PLS HELP ,i`m trying to install a cisco 3750 catalyst switch into my network as a new core distribution switch ,i currently have 3 2950 switches and 1 5509 switch ,i have about 20 vlans running on my network ,that are created as subinterfaces on a Ci...
Yes ,the 3750 had a vlan 100 with IP in same subnet ,vlan 100 was being propagated to all switches in VTP domain. I will be building a lab today ,so i`m going to test this again. Will let you know what i find. Thanks for the help.
Sorry about my ignorance on STP ,i`m in no way a CCIE or equivalent.Maybe it would help to give you some background on what we are trying to accomplish .All the inter vlan routing was being done by the 3660 by means of subinterfaces. What we are tryi...
Unfortunately i can`t post the results of the cdp cmd ,as i`ve had to remove the switch from the network ,live environment not good lab area. Strange thing is that some of the switches connected to the 3750 could ping the 3750`s management address an...
All above conditions have been met ,when i do a sh cdp neigh det on 3660 ,it shows the address of the 3750 ,but the 3750 does not see the 3660 at all ,no layer 2.
unfortunately i can`t send you any of our configs ,but how it basicly works ,is you`ll have one E1 serial interface on router ,with cable connecting it to E1 modem provided by Telco ,what you do then is create subinterfaces and assign bandwidth to ea...
