Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,Need your expertise. This is my first time to set up CME. What we have here, 1 router cisco 3945 (CME installed) and 10 router cisco 2901 (remote device). Phone connected in the main (3945 router) is getting registration but remote IP phone...
Dear Collegue,Existing VG224 Analog gateway is working fine connected to fax machines running h323 protocol. We want to activate the Force Authorization Code to conrol the facilities and this will work only in MGCP Protocol.Your output and quick solu...
Dear all,I need your assistance to configure my VG224 to connect fax machine and to integrate to call manager 4.1Your input is highly appreciated.Regards
Hi Mdawar,Thank you and appreciate your quick response. Can you sort it out a simple configuration just for testing environment, In my Cisco 3945 CME was installed connected with one (1) ephone and in the remote branches I am using 2901 router with o...
Hi Nick,Thank you for your feedback. Do you have any sample config that will help to establish the fax machine that was connected to VG224 Analog Gateway using MGCP protocol. The reason why they want to use MGCP is to use the Force Authorization Code...
Dear Virender,The doc is okay. Do you have anything specific for the configuration of Fax Machines using the VG224 using MGCP Protocol to run the Force Authorization Code.Your quick reply is highly appreciated.Thank you
Hi,Thank you for your quick response. Do I need to configure anything in the voice port and dial-peer? let say in voice-port 2/0 and dial-peer voice 101 pots.Please advice.Regards.
