Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Running L2TP VPDN(ADSL) to 7204VXR.Getting the following debug on LNS/Home Gateway: RADIUS(00010153): sending RADIUS(00010153): Send Access-Request to <RADIUS SERVER IP>:1645 id 1645/162, len 74 RADIUS: authenticator 1F B3 1E 1E B2 AD A3 .........
Running fairly standard SLB for WWW traffic on 3725 switches x 2.Also requirement to run FTP on SLB:1. Do I have to run FTP SLB as dispacted mode, as the doc says?2. What are the issues with FTP? i.e Active/Passive mode.3. How would I allow the serve...
I have a problem at the minute whereby I inserted NPE-G1 into 7204VXR Chassis with 7200-I-O-2FE-E. It seems we only have 16MB of bootflash: on NPE-G1 with 6.5Mb approx. taken up with boot image.There are two PC Cards on the IO Controller with images ...
HiJust wondering has anyone thoughts on the following:2 x 7204VXR running to single provider and running iBGP (don't ask!!!)These are hooked up to a series of stand-alone switches daisy-chained via Cat5 FastEthernet Switches range from 2900XL's to 29...
Thanks for your reply.Beginning to despair!I configured static NAT for the real server to overload on the outside external IP address of the 3725. A few problems:1. Can create an FTP Control connection outbound to public FTP servers, can't actually t...
Thanks Tejal for reply.The problem is that we need to implement this at the Home Gateway/LNS end of the L2TP tunnel, on a per-user basis. Saw the references to per-PVC or per-VPDN group.Thanks again.
Thanks for your reply Mingzhou."new install of CW components" - do I need to install thses components in any particular order?I assume I would need to install SP$ before any new install?I have backed up the CW database via the GUI. Will it be possibl...
