Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We use Cisco C9500-24Y4C stacked switches as our core routers to connect our different sites. We have a ring setup between our sites using dark fiber. We are using trunks with a VLAN as the L3 connection. The connection in question is also often the ...
Sorry. The following are not part of the ring and are distributed routing on the main campus.1.1.1.6 1 FULL/DR 00:00:39 10.255.255.134 Vlan8111.1.1.7 1 FULL/BDR 00:00:36 10.255.255.126 Vlan8091.1.1.4 1 FULL/BDR 00:00:36 10.255.255.122 Vlan8081.1.1.8 ...
I am unsure why you posted this. I can ping 10.255.255.98. Site 4 also shows the ospf int up and I cannot ping it.ALT-Core-9500#sh ip os intVlan804 is up, line protocol is upInternet Address 10.255.255.97/30, Interface ID 117, Area 0Attached via Netw...
We are currently revising the DR site and changing locations. It is new and all connections not yet established. AT&T is not the fastest mover. DR is 5.1.1.1Neighbor ID Pri State Dead Time Address Interface5.1.1.1 1 FULL/BDR 00:00:36 10.255.255.46 Tw...
I understand about the design and it is not what I wanted when designing, but mixing is unavoidable. I also understand that STP has the link blocked, that is normal as it is our longest fiber run. The problem is that even when we simulate a fiber bre...
