Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good afternoon all, I'm looking for a way for our 802.1x server to return an alternate voice VLAN ID number for the switch to use. For example, if the standard port config is: switchport access vlan 10switchport voice vlan 20 we want to be able to ha...
Good morning all! I'm running into an issue with some OSPF inter-area routing I'm working on. In a nutshell, I have a core switch and a WAN device in area 0 and the same core switch and a Fortigate in area 2. All WAN routes are learned in area 0 and ...
Thanks Greg! Bummer. We're trying to figure out how to avoid a condition where we need to set the access VLAN to the voice VLAN ID, e.g. VG224 or 3rd party SIP device, while avoiding the conflict of having the access and voice VLANs be the same, whic...
Ah, so the routes I'm trying to filter are external routes. How do I get around that? I did find this from a similar thread: The external routes can be filtered on the router that originates them, therefore, if you like to filter them on the ABR of t...
Sorry, that was a typo from the actual config. I've fixed that in the original post so both are process ID 1. Here's the output: Area 2Number of interfaces in this area is 1Area has no authenticationSPF algorithm last executed 02:00:26.514 agoSPF alg...