About jeanprochette

jeanprochette · 09-26-2024

Hi, in the exemple below it says the range for dscp value 30 with dscp-mask 30 is 33 through 63.How do you calculate the range for the dscp mask? Do you just add 30 to 33 ? ExampleIn the following example, an ACL looks at traffic that is sent from su...

jeanprochette · 08-30-2023

My understanding is that route type 5 is used when routing from two different VNIs but on the same subnet for example.How or when are those type 5 routes are generated. Is there a type 5 generated whenever a type 2 mac advertisement is generated ?Whe...

jeanprochette · 08-27-2023

Why do we need Type 5 Routes in EVPN VXLAN ? If a host on a VNI wants to reach a host not belonging to a VNI, cant the VTEP just lookup at the ospf or ipv4 unicast bgp routing table to search for a route ?

jeanprochette · 08-31-2023

Hello, thank you for your response.When you say : '' ...The VTEP performs a routing lookup to determine if the destination IP address is in a different subnet and, if so, forwards the traffic to the appropriate egress VTEP for the target VNI" . By Ta...

jeanprochette · 08-27-2023

Hi, thank you very much for the quick response. Now i understand.Very much appreciated

Member Since	‎04-03-2018 11:49 PM
Date Last Visited	‎10-01-2024 02:27 PM
Posts	5
Total Helpful Votes Received	2

User Statistics

User Activity

How do to find out the dscp range with DSCP Wildcard Mask in an ACL ?

How are EVPN VXLAN Route type 5 generated ?

EVPN VXLAN - Why do we need Type 5 Routes

Re: How are EVPN VXLAN Route type 5 generated ?

Re: EVPN VXLAN - Why do we need Type 5 Routes