I have 2 pcs. of SG250-08HPs and I try to use them.To configure the switch I connected it directly to my laptop (so there is no other device between them).I created all VLANs in GUI. All interfaces are configured correctly.I need to add an IP address...
There are many SKUs in 9120 list, like C9120AXI-x, C9120AXE-x and C9120AXP-x which is stated as "Cisco Catalyst 9120AXP Access Point: Indoor, professional installations"What is the difference between C9120AXI-x and C9120AXP-x ?
There was no IP address configured before.The original 192.168.1.254 was used to reach the switch over a direct cable from my laptop plugged in GE1.The VLAN999 (along with some others) was configured on GE8 (as trunk, uplink), but that port was not c...
Meanwhile I found another Cisco docs, and it looks like that C9120AXE and C9120AXP support same type of external antennas but "AIR-ANT2513P4M-N=" (13dBi on both bands) which is supported on the 9120AXP model only.( Cisco Catalyst 9120AX Series Acces...
