Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
VRF name is locally significant and is not sent in any updates to other PEs. RD is used to make an update unique within the MP-iBGP portion of your MPLS VPN network and is sent as part of the MP-iBGP update between PEs. Its what makes a prefix a VP...
CEF is required on Cisco routers to support MPLS because that is the forwarding mechanism IOS uses to create the LFIB. Other vendors will have their own forwarding mechanism and they may have their own requirements that must be configured in order f...
You can see the defined capability codes at the following URL:http://www.iana.org/assignments/capability-codesIETF lists 131 is vendor specific.It corresponds to Multisession BGP which is in draft form.http://tools.ietf.org/html/draft-ietf-idr-bgp-mu...
In order to run SSO the config-registers on both the PREs have to be the same and they have to run the same IOS. Make sure that there is the same exact copy of the IOS (same feature set, everything) on the PRE that is standby is loaded in the locati...
Yes, yoiu can configure the xconnect under the SVI on the ME3750 and therefore have multiple L2 ports associated with that VLAN on the ME3750.Look at the URL below and you will see in the directions for configuring EoMPLS that you can specify the xco...
