Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Description of the issue
Multicast Receivers are unable to receive traffic initiated by the Multicast source.
Verify if your device configuration matches the following configuration.
##### FE1 ########ip routingip multicast-routing vrf Engineering...
Description of the issue and topology
External Host or Server reachability from Fabric hostDHCP IP assignment failure
Topology
Control Plane and Fabric Border are non-colocated
Configurations
Core:
router ospf 10router-id 71.0.0.1network 50.0.0.0 0....
In the case of route distribution between BGP and LISP.
Description of the issue
The external host or server is unreachable from the Fabric hostThe DHCP IP assignment fails
Pre SD-Access:
=== Core ===router ospf 10router-id 71.0.0.1network 50.0.0.0 ...
Same Switch
In this case, the client is unable to communicate with another client. Possible scenarios include:
The Layer 3 Client is connected to a single Edge, same Virtual Network, but a different VLANThe Layer 3 Client is connected to a single Ed...
Verify which VLAN or SGT is assigned to the switchport. The VLAN or SGT can be assigned and verified as follows.
Description of the issue
The VLAN or the SGT is not applied to the packets originating from a client connected to a particular physical ...
