Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We went to configure up some 1010 firewalls last week with PPPoE and FMC management, however stumbled across this brilliant lack of feature from Cisco:"PPPoE is not supported. If your ISP requires PPPoE, you will have to put a router with PPPoE su...
Follow this guide: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/smart-licensing/qsg/b_Smart_Licensing_QuickStart/b_Smart_Licensing_QuickStart_chapter_01.htmlMake sure the router has full connectivity (DNS lookup, external routing to the internet...
Just an update to this issue. We did some testing on some new 9200 switches we purchased that are going to be running the Paxton PoE door controllers and ran into this issue again. Previously we set the power statically at 30000 which gave us false h...
We're running the latest 7.2.1, PPPoE is configurable for the WAN interface but FMC management can't be used on this interface, which seems madness considering all other vendors do support management on the external interface. Going to have a look at...
We just set the command that I mentioned before (power inline static max 30000). If you have LLDP enabled you can see more specific power requirements for most devices (show power inline [PORT] detail). Running this command shows the LLDP info power ...
