Hi Team,   i am working on one task to replace existing EOL juniper switch with new Cisco 9300 switch.   i have current Juniper config , is there any way/tool to translate these Juniper commands to Cisco? ... View more

Hi Guys,   i have created topology where i want to Track 8.8.8.8 IP.   if first path with deafult route goes down then it should take another deafult route which is having higher AD.   Please find attached file and below config.   R2: ip sla 1 tcp-connect 8.8.8.8 5000 ip sla schedule 1 life forever start-time now   track 10 ip route 8.8.8.8 255.255.255.255 reachability ip route 0.0.0.0 0.0.0.0 20.20.20.1 track 10 ip route 0.0.0.0 0.0.0.0 30.30.30.1 10   --------------------------------- As per current config, i am able to ping 8.8.8.8 ip which is configured at R4 from R2. R2# traceroute 8.8.8.8 Type escape sequence to abort. Tracing the route to 8.8.8.8 1 20.20.20.1 52 msec 56 msec 52 msec 2 10.10.10.1 100 msec 100 msec 52 msec 3 40.40.40.2 92 msec 56 msec 84 msec Core_Switch#     R2# traceroute 8.8.8.8 Type escape sequence to abort. Tracing the route to 8.8.8.8 1 30.30.30.1 76 msec 80 msec 84 msec 2 40.40.40.2 128 msec 80 msec 104 msec   My requirement is to go from 20.20.20.1 and if any failure on this path then need to shift on 30.30.30.1 with IP SLA tracking in TCP-connect, Can anyone please help into this? ... View more

Hi Guys,   i am handling Cisco 3850/3650 as Core switch. I have attached tpology diagram here.   i want to check how i can apply QoS on this Core switches for below requirements. - QoS policy on the LAN including RTvo, RTvi, D1-D3 classes QoS policy matched on the WAN (need to add RTvi) currently looking circa 80 Mbps RTvo 360 Mbps RTvi ... View more

Hi Guys,   currently i have 2 cisco 2504 wireless controller configured in N+1 setup and located at 2 different site. But as 2504 does not supports SSO, customer has decided to go for 3504 controller.   can you please tell me if I can replace 3504 with 2504 directly. I know i need to do SSO config   but are there any challanges to replace this i. location challange - can i do SSO with 2 3504 controller located at different site? ii. Any license challanges. Currently 2504 having 67 AP licenses, can i inherrit same on 3504? iii. Config challlanges? ... View more

Hi Team,   we are having many cisco swithes including 2960, 3750 , 3650 and 3850 models.   can any one help me or suggest what best hardening practices i should configure on switches before Penetration testing. ... View more

Hi Guys,   Need your help on this.   I am managing CIsco 2504 WLC and i have configured P2P Blocking Action in SSID.   My requirement is two users connected to that SSID , do not need to communicate.   After configuring P2P Blocking in that SSID , Users connected to Same AP are not able to communicate with each other.   But when Users moves to differnet AP. ex. One user remains there on previous AP and second user moves to different AP with same IP address  then they are able to communicate with each other. Can you please guide me what configuration is required to avoid this? ... View more