Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone.I'm experiencing a problem with a AP1231G. (AIR-AP1231G-E-K9).I've a mixed network (802.11b/g) with Xp client, Psc gun with Cisco Radio. I can connect correctly all g clients but I cannot connect to the Ap the b client (both Pc and Psc gu...
Hi Everyone ! I've this network:INDOOR:1 Ap 1200 802.11b with 2 standard Rubber Duck 2.2 Dbi antenna configured as Root unit.OUTDOOR:1 Ap 1200 802.11b with 2 omni antenna (AIR-ANT 2506) 5.5 dbi configured as Repeater2 Wireless Terminal PSC Falcon 345...
Hi Everyone !! Sorry for my stupid question, but I'm not sure about this configuration.I have to set up a Remote Access Vpn (PPTP or L2TP) between my Network an two Win2k client. In my network, I have only a broadband connection with Cisco Soho 77, ...
HI Everyone !!I need to cover a wide-area with only one Access Point (Aironet1200) but I'm not sure if I can use an Outdoor Omnidirectional Antenna (Air-Ant2506) with Access Point because Cisco reccomended to use with Bridge. Could you help me ??Than...
Hi Scott, thank you for information but, unfortunately, I've already try to setup what you do (If you can see my config. you see that the speed config are set to "default"). I've also try to change prembles mode but the problem still persist.ByeErman...
Than you very much but it does not reply to my question. The main question is: Can I use an high-gain antenna (that Cisco recomended for Bridge function) for access point and therefore for client association between Access Point an client (such as No...
