Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, The SR520W has built-in wireless and DHCP services. However, if I don't want to use the DHCP server of the 520 router, and choose to use a DHCP from another server (Windows SBS), the wireless clients that authenticate do not get an address ass...
Hello,I have a Cisco 2501; after a power outage it will only boot to "boot mode". The register is set to 0x2102 and "sh flash" displays the valid image. The router config is still then, and is loaded to RAM (sh run) on boot. The local FaEth (LAN) add...
Currently I have a FR network, consisting of 18 PVC's. I wanted to introduce some HA or Failover when one of the PVC's goes down. What are my options on a 2620XM? I do currently have a VPN solution, should IPSec/SSL be an option. However, I'm wonderi...
Hello,I have 6 users on a small WLAN. The AP is an 1100 Series, and I currently have no WEP encryption enabled (nor WPA) for testing purposes. The network has worked fine for a few months without any disruption, however I now have (2) of the (6) wire...
Is it possible to assign to different SSID's on an 1121AP? I would like to have both SSID's apply to the local subnet. However, one SSID would use one WEP key, while the secondary SSID would use a different WEP key. I've configured both SSID's in the...
Yeah, the 2500 series is a bit old school. However on a SMB budget, money is better spend on new hardware in leui of replacing hardware that has worked. However, in light of this mishap, it's now replaced with a 2811. Thanks for your help everyone!
WOW! Thanks for the concise answers.I do hover have some follow-up questions.1) Where can I find a step-by-step solution on how to setup 802.1x authentication or WPA-PSK in the Web Interface. I have looked within the 1100 AP Installation and Config G...
