Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All. Quick question regarding traffic shaping priority. When default traffic shaping rules are enabled, do these rules apply first before a custom traffic shaping rule is created even as a high priority?We would like to send all VoIP and Video Con...
Hi All. Brand new to the forums as this is my first post. Our company has Meraki MX appliances setup at 3 divisional offices at the moment. Two being MX67's and one being an MX100. Our switching environment still consists of Catalyst 3750's and 3560'...
Thank you Bruce. We're currently using VTP transparent mode on all switches so it should be as simple as adding the Wireless VLAN to all switches. We're also not restricting any VLAN's on the trunk ports between switches.I plan to change the config i...
The plan would be to add an additional Wireless VLAN (200) to the MX and switches to keep wireless on a different subnet. So would the config for the Meraki AP be as simple as the following:interface GigabitEthernet1/0/1description Port Ready for Mer...
All 20+ switches in our HQ would need to be configured for that new management VLAN then correct? Currently, we have these switches daisy chained to one another as just switchport mode trunk and switchport mode encapsulation dot1q. All trunk ports wo...
