Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are using LMS 2.5 with Common Serivces 3.0.3, RME 4.0.3, Device Fault Manager 2.0.3, Internetwork Performance Monitor 2.6.0i have noticed (thanks to some ACLs) that CiscoWorks is doing ping all the devicesSep 15 17:58:49.163 UTC: %SEC-6-IPACCESS...
We are using LMS 2.5 with Common Serivces 3.0.3, RME 4.0.3, Device Fault Manager 2.0.3, Internetwork Performance Monitor 2.6.0i am working on CiscoWorks since 2 weeks and i have some question1)- when i select on "Common services" ---> "Device manage...
Hello Alli have a LAN whit many servers,but only 2 need to be balanced. So i think in one-arm model, due to the higth trafic that not be pass trought ACE.i have a vlan 900 where is the client side and the VIP also. (10.0.9.64/26)the servers are in v...
also i have this message:{diskWatcher} - Available space in /var of server mckcw2k1 is less than 20 percent.What do i need to see to find the problem??
thanks jclarke for your faster answeras i am newbie on ciscoWorks, What does it mean DCR? about my first question, i founded that missing devices are in "Conflicting Device Types" in "Device Management" in RMe. Its shows the following: Device Identi...
i have similar problem. the catalyst restart the ace, and ace doesn't work.Also i have two catalyst conected in trunk, and i have two ace, one in each catalyst. No redundancie. both have the same problem.ACE ios is: boot system image:c6ace-t1k9-mz.A...
sorry it's my first post here and when i read all the post that i wrote, i figured out that the next command was missing on Vlan503:ip policy route-map From_Server_OSS_to_ACEi didn't know how to erase my post.i hope the problem is going to be solved ...