Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have configurd a remote access ipsec vpn to a ASA 5510. I can connect to the firewall using my Cisco VPN client properly. But there are some networks in our internal network that I was not able to connect to. I would like to know, I have assi...
Hi,I am setting up a ASA 5510 to accept remote access IPSEC vpn connection. After I configure the firewall using the command line, and try using the Cisco VPN Client v5.0.02.0090, it cannot connect. And when I look at the logg on the firewall, i saw...
We are setting up local username database on the switches, and would like to separate the admin user into 2 groups, one group has access to the enable mode (EXEC privilege), while the other group cannot, and can only do 'show' commands' like 'sh inte...
We have a pair of Catalyst 6509, one is having very high cpu constantly, and the two cpu-intensive processes are ios-base and tcp.procAttached file shows:1) show processes cpu2) show processes detail ios-base3) show processes detail tcp.proc4) show v...
We have a pair of 6500 switches, with two 20G uplink to a pair of stacked 3750E switches, on the 3750E stack, one 20G is in forwarding state, while the other 20G link is in block state. Since we want to make sure that when one of the 10G link is dow...
I fixed the problem myself. Basicallly i re-configure the vpn from scratch. There are some old crypto configuration, maybe the cause of the problem.Thanks.
Reza,Thanks for your reply.My question is, with your solution, the user will be able to do only the show commands when they do 'enable 2 xxxxxx' to login in at privilege 2 level.But if they somehow discover the enable password (for privilege 15), th...
Jon,Thanks a lot for your advice.I did a show tcp brief, and saw a few 'established' connection to the switch itself, then i did a show line, and saw there are 6 telnet sessions sitting there for more than 9 weeks, which is strange... I configured th...
Jon,Thanks very much for your reply.I did actually go through that document before and didn't find anything that seems to apply to our network. I am planning to do a packet capture on the switch to look at the traffic, but I am afraid the monitor ses...
