Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I would like to filter the routes advertised out an interface by EIGRP based on a route tag. I am migrating from OSPF to EIGRP in a fairly large network. I have redistributed OSPF routes into EIGRP, and EIGRP into OSPF.My problem is with one remote s...
Eigrp redistributing OSPFI have two problems here.One is redistribution of OSPF into EIGRP. Redistribution seems to work fine, my redistributing router has all of the OSPF domain routes in it's topology table. It does not seem to advertise these ro...
I gave it a try, and have the desired result, sort of. Almost all of the traffic now takes the fiber link (mostly because of the default route). But, the external routes are now not present at all on r495prtg1. I would have expected them to be lea...
I set up a few different methods in a lab. The following all had the desired effect on the routing table.====================! this example filters external routes from being advertised out interface vlan93! specificaly ones redistributed from ospf ...
Thank you Edison.It occured to me that I could also summarize the routes outbound on the wireless link at R421osbr1. This way, R495prtg1 would have summarized routes from the wireless and be able to learn the more specific routes via the fiber links...
Hi Kevin.R251dnld-1 has loopback address 172.31.30.1. R74-EIGRP has loopback address 192.168.250.21. Both routers acquired the RID 172.31.30.1. Router R74-EIGRP never had this address configured on it, it was the first router I configued for this ...