Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everybody,I have a Cisco ASA 5505, public ipv6 in outside interface, private ipv6 in LAN, from router I can ping any ipv6 in Internet and ping my LAN ipv6. Traffic doesn't go through router.This is my configuration.interface Vlan1 nameif inside...
Hello all,In the last 8 month I have been upgrated at least 6 Cisco ASA 5505 from 8.2(1) to 8.4(3) without problems, I did a minor changes and all related to rules due a problem with the migration.Scenario 1object network LAN-PC1 host 192.168.100.50o...
Hello everybody,this is the configuration sample that Tunnelbroker gives to IOS router (not ASA )configure terminalinterface Tunnel0 description Hurricane Electric IPv6 Tunnel Broker no ip address ipv6 enable ipv6 address xx:xx:xx:xx:::2/64 tunnel so...
Hello everybody.I just got a Cisco asa 5505 with the next OS and ASDM infoASA 5505 OS 8.4(3) ASDM 6.47I configured and enter all rules to allow incoming traffic to LAN but it's not working also, I have one host inside that is configured in a second I...
Hello everyone...I have a cisco 831, I configured with VPN access.I do VPN with Cisco VPN Client.I have some static NAT.The question is..How can exclude VPN to do NAT.What I want is that when I am connected via VPN, I want full access to my LAN with...
tglen:Can you explain how to create a tunnel with TunnelBroker? I read about it here and the ASA can do only encrypted tunnels and tunnelbroker doesn't support encrypted tunnels. I will appreciate any information.Have a nice day.
Justin,I'm gonna tell you what I have in my network.Local network: mynetwork.localInternet domain for email: mydomain.comgo to DNS services and add the "mydomain.com" and add all records that you have in the internet domain, point all services that y...
Justin,I have an internal Exchange server and I did the next.domain: mydomain.comWhen you are in your internal network, you have to set to MX record to point internally to you local exchange, for example.exchange.mydomain.com A 192.168.1.200mydomain....
Justin, this sample is for ASA 8.4(3)Single port from Internet to single LAN IPobject network LAN-PC1host 10.10.100.50object-group service LAN-PC1-8000 tcpobject-port eq 8000access-list incoming extended permite tcp any object LAN-PC1 object-group LA...
Josh, I have been upgraded some customers from 8.2(1) to 8.4(3), the only think I can point is:* When you have a rules where you allow a traffic from specific network/ip, the version 8.4 doesn't translate it well.* Review all rules one by one.I did a...
