We have connected a Catalyst 9500 to a ASR1002-X using MMF. The Catalyst 9500 has a SFP-10G-SR-S and the ASR1002-X has a XFP-10G-MM-SR. Are these two SFPs compatible as the link is showing UP/DOWN on the ASR1002-X end and UP/UP on the Catalyst 9500 e...
I have an issue when I connect a Tablet to a Docking Station to a Cisco 7911 Phone that is then connected to a LAN Switch port. The LAN Switch port is configured with Port Security and a MAC address limit of 5.What is happening in some situations is ...
I am having a problem with a ws-g5483= (Copper GBIC) that I have deployed into a Catalyst 6509. The interface will not activate and I do not think it is a problem with the cabling or the LAN Switch (C3750) that it is connected to. It is not a hardwar...
I have a particular situtaion that will result in a 9 db loss on a fibre cable between two devices. The data sheet for the 1000BASE-SX SFP states a Transmit Power (dBm) range of -4 to -9.5 . The receiving 1000BASE-SX SFP has a Receive Power Range (...
I have a Cisco Catalyst 2950 but when I examine the Flash memory the amout of free memory does not seem correct, e.g.C2950_Swithch#sh flash Directory of flash:/ 2? -rwx???????? 109? Mar 01 1993 00:01:55 +00:00? info 3? -rwx????...
Hi,Did you resolve this problem. I'm getting exactly the same but when using a Supy 32. Also the switch will get to the same stage, i.e. Image text-base:and then start over the RP loading sequence.
Issue resolved Turns out that the HTML is a directory and cd to it and found a load of files in this directory which accounted for a large proportion of the missing flash. The HTML directory files are used to support the Cluster Management Suite....