Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have an ASA5512X and experiencing an issue with connectivity. Basic network layout is - Inside-Gi0/1 - - - Mail Server A (local IP 192.1.1.1) | ...
Hi,
I hope someone can help me, I have a ASA5512-X which is configured with a single 'outside' interface connected to my providers network. With this link we have a /26 ip address range which a single IP is allocated to the 'outside' interface and ...
Hi,
Please could someone help me with regards to creating sub-interface’s on an ASA5512-X, where devices connected to a 2960-X switch can access the specific sub interfaces (Vlan’s)?
Basic connectivity is - External Gi/0/2 <-> ASA5512 <-> 2960 <-> ...
Hi,
I am using an ASA5512, basic setup is -
Outside 0/0 - ISP
Inside 0/1 - LAN
Public 0/2 - Public servers
Can someone tell me if it is possible to create a firewall rule for outside traffic allowed from 3 specific IP addresses to a client on the...
Hi,
I curently have a very simple setup
ISP Router <---outside---> ASA5512 <---inside---> Host
There is nothing else on the ASA yet.
I have configured the host as a public server in the ASDM application, when I try to access the server via the ...
Thanks for your response, I will read the linked information to see if this helps me.Traffic can not go between Mail Server A and Mail Server B directly as the interfaces need to be kept separate.
Hi, Any ideas what the Translated Address should be set to, I don't have any targets for the secondary IP range yet and they wont all be on the same network segment anyway?
Thanks
