Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys, I have a question.Is it possible to create a tag via API and add specific APs to this tag?Unfortunately I have not found any information about this on the net.Thanks.
Hello, community,I have a little problem.I've got two MX67C's, one is HUB and the other is Spoke. Everything works perfectly, all networks are also visible in the VPN.Now the problem.On the Spoke MX I use the built-in LTE modem as backup line. LTE li...
Can you configure a PSK with less than 8 characters at Meraki?If I try to configure a PSK with less than 8 characters, I get an error message that it should be at least 8 characters.I know it's not safe.But I still ask, can you set somewhere that sma...
hi GuysI have a problem.I got a new MR33 and 4 new MR42e APs and should set them up.The APs are connected to a Cisco 2960 switch, switch port is configured as a trunk with Native VLAN 555.VLAN555 also assigns the IP address and comes on the Internet....
Hi, Phil,Thanks for your message. I spoke with the ISP and he confirmed that we got a wrong SIM card where the VPN functionality is not enabled. Now they want to send me another card.Thank you.
Hello,I opened a ticket at Meraki and Meraki technician did exactly what you write. He pulled traces from both sides and he only sees unidirectional traffic. He also told me to talk to my ISP.Thanks again for your message.BRMamba
Hi,VLAN was not entered. As I said, MR33 works perfectly on the switch and gets the IP address from the DHCP server.Yes, DHCP Scope is big enough. I tried two things. One external DHCP server and one DHCP on the switch.in both cases MR33 works fine a...