Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can someone experienced with IOS-XE overlapping NAT configurations help?We have a situation where two devices with dual NIC's containing identical sets of IP addresses (two sets of overlapping addresses) are intended to reside on our network. The man...
SOLVED:Today, we discovered gradually increasing packet loss to one of our remote network switches located at an unmanned and locked facility. The degredation resulted in the loss of voice and data communications. Remote management was also lost. Loc...
I am posting a resolution to a problem that I have encountered only once before, about two or three years ago. The issue arose yesterday and resulted in hours of troubleshooting until a coworker recalled the previous occurrence: I am posting a resolu...
SymptomsNetwork latency/sluggish performance during normal operations relying heavily upon UDP forward-protocols between normally segregated broadcast domains, internally and site-to-siteFrequent software application time synchronization losses resul...
I got confused. I have no experience with NAT. No need to route-map outside. We're just trying to translate internal addresses to advertise themselves like other addresses on our inside network. I am trying to get four separate internal/static vrf's ...
Thank you for your reply. Unfortunately, that didn't work. The ip nat outside options do not support route-mapping to static addresses. Instead, the ip nat outside route-map option looks for a dynamic address pool. I cannot use a dynamic pool. Overla...
I made a typing error in my original post. Subinterface Gi0/0/0.7 is supposed to be Gi0/0/0.500. I am attaching a .jpg image of a basic network diagram illustrating our intentions. Thank you!
