About Walsby1983

Walsby1983 · 02-27-2012

Hello, i'm having issues getting various model switches to sync with a newly built NTP (Win2008) server with Atomic clock attached to it. The software for the clock is set to stratum 1. I know the clock is syncronising and the server is showing the c...

Walsby1983 · 09-08-2011

Hello all, im after some advice.I have setup 2 2960s with flexstack. I have setup a channel group (LACP) on G1/0/1 + G2/0/1 (cross stack) which connect to a storage box.I'm a little stuck when it comes to the load balacing and fail over;Do i use sour...

Walsby1983 · 08-05-2011

Hi all, im after some advice re vlan gateway's per switch!I'm currently implementing some new vlans, we have 2 core switches (4500's) that are connected via an etherchannel which our access switches connect into. One being the VTP master (if thats re...

Walsby1983 · 05-25-2011

Hi all, after some advice - just started using CNA and have created a community which is all fine. I have a few switches that are there but are yellow in colour rather than green, if i right click them i have the option to add them to the community.....

Walsby1983 · 02-28-2012

!ntp update-calendarntp server 10.0.101.15!endBelow is the debug info from the Timesync software;Timesync NTP Service 3.2Windows InfoVersion=6.1 Build 7601 0601Winsock InfoVersion=1.1HighVersion=2.2Description=WinSock 2.0Status=RunningMaxSockets=3276...

Walsby1983 · 02-28-2012

Thanks Kunal, if i add that to the config I get sh ntp status;Clock is synchronized, stratum 3, reference is 127.127.7.1nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**7reference time is D2F72BBF.EE855780 (10:32:31.931 GMT Tu...

Walsby1983 · 02-28-2012

Morning, thanks for the replies.It is a seperate service to the Windows Time Service, apologies if i did not make that clear. A peice of software called TimeSync that relies on the Windows service running but stops it from setting the time.

Walsby1983 · 02-27-2012

Got the following from term mon;*Mar 17 03:47:27.956: NTP: xmit packet to 10.0.101.15:*Mar 17 03:47:27.956: leap 3, mode 3, version 3, stratum 0, ppoll 1024*Mar 17 03:47:27.956: rtdel 0000 (0.000), rtdsp 10001 (1000.015), refid 00000000 (0.0.0.0)*M...

Walsby1983 · 02-27-2012

Stuart - Have turned that on, keeping an eye on it - thanks

Member Since	‎05-25-2011 06:18 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	16

User Statistics

User Activity

NTP server advice

2960s Flex stack and etherchannel/LACP

VLAN Gateways...

CNA - switch appears in topology view but not part of the community

Re: NTP server advice

NTP server advice

NTP server advice

NTP server advice

NTP server advice