Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I have a question around TFTP inspect. With firewall rule configured to allow connection from outside interface on port 69.
When TFTP inspect is enabled on an ASA firewall, does this specifically only allow for file transfer from client to se...
Hi All,
A newbie in multicast and started playing around with sparse-mode.
I have attached a sample diagram.
Brief summary:
R1- IGMP router for source (R5 is simulatyed multicast source)
R2- Rendez-vous point
R3- Upstream Mcast router to R4
R4- IGMP ...
Hi All,
I'm having a play around with Cisco Dense mode and trying to understand multicast in mode detail.
I've attached a sample network diagram, where R5 router is a multicast server and R4 is a multicast receiver for address group 239.1.1.1.
When i...
Hi All,
I'm having some difficulties in understanding the reason why we need to turn on the cdp/lldp on vds.
What i understand is that the leaf can detect the ESXi host running cdp/lldp, and the ESXi host can do the same to detect the leaf switch. On...
Hi All,I'm currently learning about GLBP. I have 6 routers as part of a GLBP group. The reason that I have six (I know it's a bit too much) as I was trying to proove a theory.So far 4 of the routers are acting as 1 AVG (R1 ) and 3 AVF (R2, R3, R4) an...
Thanks Ipmember. That helped, and i manage to verify it in my lab. As you mentioned the ACI will detect the vDS by cdp/lldp. But i also realized through my testing that the other reason is required is for EPG port group creation on the vds. Apparentl...
