Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have increasingly been having issues around two new FPR1010s bought as a cheaper basic set of firewalls to add to our network. I was hoping I could get some advice 1) My first FPR1010 I thought I would configure the management port so I co...
Hi There,After accessing a new FR1010 from cli, I entered what I thought was the configuration so that I could place the management interface on our network. However my config sits on management0? Which doesn't seem to be a physical interface and whe...
Hi there,Hope your all well,I am currently looking at not only implementing a new DMZ but also allowing for our migration to Office365 services with that. I was hoping to reach out and ask how people have faired with O365, already I am hitting bumps ...
Hi there,
Hope your well, I have a firewall that I am doing some testing on. I have firepower set up and working and do not want to effect it with my testing. I had wanted to see if setting my firewall up as a zone based firewall would be more benefi...
Hello all!
I am configuring a cisco 2911 and admittedly I have little voice experience. I have plugged a 2 port fxs card into my router which appears when I type "sh inv." However if I "show voice port sum" I see no normal voice ports e.g.0/1/0 inste...
Hi MarvinThanks for your response, I believe we must of, when I console to the device it says firepower>. I was hoping that using the inside ports and a https connection we would be able to access firewall functionality. I think it was just assumed ...
Thanks Rob,Ill check that out, just reading deeper about the FTD, it looks like its some form of progression away from ASDM/ASA unless I am misreading. It may be worth exploring FTD to see if I can do the things I would want to do on this device usin...
Hi There,Thanks for your response I have been able to reach it via https to the FDM gui, which should allow me to do some interface config. I am hoping to still use ASDM on it however, will this mean it needs some form of re-image?
Update: I have been able to access the management0 port now via the local switch and ssh to the address. Still unable to access any form of ASDM/ASA cli. Have tried to get to the local FDM manager on the device by using "configure manager local" how...
Thanks, that link was amazingly helpful, you have given me somewhere to continue my search and I recommend others reading this to try the link themselves!Unfortunately I have fallen down the rabbit hole of trying to get my head around the REST API on...
