Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I have some branch offices with a Cable ISP company with dynamic IP address, I'm trying to create a script to automatically send an email if the interface get a new IP address if the interface get the previous IP do not send an email .
So ...
Hi All,
I'm trying to run an EEM with tm_suspend_ports.tcl , just uploaded the tm_suspend_ports.tcl into flash:/ via TFTP but when I'm trying to register getting the error: Getting error : EEM configuration: policy file tm_suspend_ports.tcl could ...
Hi All,
We have Cisco ISE version 2.0 and push Cisco Anyconnect version 4.2.01022 , ISE Posture module 4.2.01022 and ISE Compliance Module 3.6.10294.2 to the remote users PC with Windows 10 but those users are getting the following error in the Post...
Hi ALL,
After I import a certificate with GlobalSign from another ASA users from anyconnect are getting this error message:
Anyconnect cannot verify server : domain.com
Certificate does not match the server name
Certificate is from an untrusted ...
Hi ,
I'm getting the following error while apply the Sourcefire_3D_Defense_Center_S3_Upgrade-6.0.0-1005.sh
Update Installation Failed: [ 1%] Fatal error: Error running script 000_start/003_check_DC_memory.pl
Any resolution will be appreciate
...
Joe,
Now it is working after created the event manager user:
Commands: event manager session cli username EEM
user name EEM privilage 15 secret ....
Thank you my friend ...
Joe ,
Doesn't work , I just convert the applet to tcl using the conversion tool that you previously mention . see tcl attached.
The error I'm getting is Command authorization failed in the Test.txt file append.
here some event manage tcl debugs :...
