About mivbinfotech

mivbinfotech · 11-29-2015

Hi Members I have 2 appliances as follows: 1. Cisco ASA 5505 Ver 9.1 - fixed Public IP 2. Cyberoam 50ING Firewall Appliance with Dynamic IP which changes at the ISP end What i am looking to do is establish a site to site vpn. What i tried is as fol...

mivbinfotech · 12-07-2015

Hi there this is incorrect, we ran a similar packet capture on teh remote end and see no traffic is being sent by asa to the remote end. interesting, if there is an issue at the remote end, how is 1 way traffic which is initiated from remote end work...

mivbinfotech · 12-07-2015

Hi there the capture syntax provided was wrong the "ip" before host was missing the result of first capture is 12 packets captured 1: 03:29:23.860917 802.1Q vlan#1 P0 10.1.1.10 > 10.10.50.13: icmp: echo request 2: 03:29:28.638104 802.1Q vlan#1 P0 1...

mivbinfotech · 12-07-2015

Hi there when i say i am able to pass traffic one way, i meant the tunnel is up successfully and shows active at both ends cyberoam and asa, any other thoughts issue is not with initiate traffic. this what the command gives me interface: outside C...

mivbinfotech · 12-06-2015

I did a pactet capture from ASA to the remote subnet is is droppoing the packet on VPN it says subtype ipsec tunnel flow action drop

mivbinfotech · 12-06-2015

Hi there I have managed to get the tunnel up and running but i still have a very strange issue ASA - - outside IP 178.1.1.6 - inside subnet 10.1.1.0 Remote End - outside is dynamic IP - Local Lan Subnet 10.10.50.0 The issue is i can ping from remo...

Member Since	‎11-29-2015 01:51 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

L2L VPN Tunnel between a ASA 5505 (9.1) and Cyberoam Firewall appliance

Hi there

Hi there the capture syntax

Hi there

I did a pactet capture from

Hi there