Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi. I have that same problem on a rv325 with firmware 1.4.2.22 (when I started to use vlans).I have a device that starts doing arp requests because of the ICMP Redirect and hence can't be reached from other vlans. The device is on port 10 (and port 1...
Hi. Does it work if you connect your server directly to your service provider? My service provider blocks tcp/80 and tcp/25 maybe yours is blocking tcp/81. Since you are opening tcp/81 on the router and your server, you should use port forwarding + f...
Hi.I got my rv325 yesterday. I replicated my rv220w config on it and everything works perfectly.Here is what I did to replicate my firewall rules.I will use two cases.1) I want to open port https on 17443 and redirect it to 192.168.2.17 https 17443 (...
@randrade86 wrote:In my KIWI SNMP log I see the RV325 ALLOWing traffic but the port remais closed. So looks like something "inside" RV325 is still blocking or not forwarding the traffic correctly.
Or it could be the firewall on your server. You could...
Do you have an entry in Firewall -> Access Rules like
Enable: yes
Action: Allow
Service: TCP3000
Source Interface: WAN1
Source: Any
Destination: 192.168.63.2
?
I believe that there is only one Service Table but two views into this table. One fo...
