Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I would update my ASA 5505 from
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.2(1)
to
Cisco Adaptive Security Appliance Software Version 8.4(2)
Device Manager Version 6.4(5)
Do you think is needed to...
Hi all,
I've a question, after the command
clear config all
set using a SSH , as aspect all the connection drop but what happen after a power reboot of the firewall?
The previous configuration save will be load again or the firewall still in a not ...
Hi all,
I would like implement a configuration based on (Cisco 2800, ios 12.4(13r)T) in order to have clients inside that connect a server outside using a single outside IP address.
Best Regards
Hi all,
I need to reset a firewall (ASA 5505) located somewhere , I would like to implement a remote reset using SSH in order to clean the configuration and with all port in shutdown... in other way with only a physical access available (using CONSO...
Ok, with the configuration below it is working
how can I create a pool with single IP address instead of 4?
interface FastEthernet0/0 ip address 192.168.0.254 255.255.255.0 ip nat inside!interface FastEthernet0/1 ip address 172.16.0.254 255.255.25...
Sorry for the puzzle.
My intent it is to find a workaround for Server that accept only one client connection per each. I'm trying to forge multiple request as coming form single IP address, as reported in the scenario attached on my first post.
It i...
Hi,
do you think that I have to implement also some access-list? My scope it is to forge client's request to the server as a Unique IP address (due to the restriction on server 172.16.0.250)
Best Regards
interface FastEthernet0/0 ip address 192.16...
