Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an 881 router configured with 2 dhcp WAN connections. I am trying to configure failure detection of the primary connection (I do not really care about the secondary at this time).I have an ip sla/track configured to monitor the primary WAN co...
Situation:-RV042(v3) with latest firmware (as of today)-Remote user behind a Cisco ASA 5505 (runing 8.4 firmware) is not able to connect using the QuickVPN client-Quick always fails the "Verifying network" phase-QuickVPN can connect from other locati...
I have an ASA 5505 running 8.4.4.1. I've configured three WAN interfaces and have assigned failover on one of them (we have two ISP's, and a total of 3 static IP's in 3 different subnets). I've noticed that all the traffic is flowing through only o...
We upgraded our ASA 5505 to the 8.3(2) firmware image and we have a working VPN configuration (Windows VPN clients can connect and browse the office network as well as their local networks [split tunnel seems to work in this regard]). However, while...
Ref: Cisco Support Case 630249873I have confirmed with Cisco support that this is a feature not in the RV180 firmware.Adding it to the next release may not be possible so Cisco has opted replaced my unit with an RV180W that does support RADIUS authen...
I tried the info from the lnk above and was not successful.-creating three access rules for esp, udp/isakmp and udp/4500 did not resolve the issue-neither did adding the ipsec passthrough setting on the default inspection list (was worth a shot)-mayb...
Okay, logged a TAC and got it working:In this instance the only thing that needed to be changed was the NAT rule.My original rules were interface rules, which only worked on the default route (WAN1). Setting the "outside" value to the WAN2 interface...
The IP's we were assigned are next to each other:a.b.c.68/30 (.69 as theirs and .70 as ours)a.b.c.72/30 (.73 as theirs and .74 as ours)I may be able to get the ISP to combine them into a /29 group of consecutive usable IP's, but that will take some t...
I suspected as much, but that puts me in a tough spot as I've got two services that work on port 443 and neither can be changed to use another port. The OWA access is used by smart phones (no option to set/change the port) and the RDS Gateway does n...
