Hi, I am setting up new UC540 and trying to setup WAN connectivity. but not working,the UC540 is getting public ip address and  I can ping google, microsoft but cannot surf . what am i doing worng? all the information releted wan port are below---- interface FastEthernet0/0 description $ETH-WAN$ no ip address ip mask-reply ip directed-broadcast ip virtual-reassembly in load-interval 30 duplex auto speed auto pppoe enable group global pppoe-client dial-pool-number 1 interface Dialer0 description $FW_OUTSIDE$ ip address negotiated ip access-group 105 in ip mask-reply ip directed-broadcast ip mtu 1452 ip inspect SDM_LOW out encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap pap callin ppp chap hostname (removed for privacy of customer) ppp chap password 7 097958510A091C0801 ppp pap sent-username (removed) password 7 03314D5315032A5644 ppp ipcp dns request here is the access- list 105 access-list 105 remark auto generated by SDM firewall configuration##NO_ACES_16## access-list 105 remark SDM_ACL Category=1 access-list 105 deny   ip 10.1.10.0 0.0.0.3 any access-list 105 deny   ip 10.1.1.0 0.0.0.255 any access-list 105 deny   ip 192.168.10.0 0.0.0.255 any access-list 105 permit udp host 207.164.234.193 eq domain any access-list 105 permit udp host 207.164.234.129 eq domain any access-list 105 permit icmp any any echo-reply access-list 105 permit icmp any any time-exceeded access-list 105 permit icmp any any unreachable access-list 105 deny   ip 10.0.0.0 0.255.255.255 any access-list 105 deny   ip 172.16.0.0 0.15.255.255 any access-list 105 deny   ip 192.168.0.0 0.0.255.255 any access-list 105 deny   ip 127.0.0.0 0.255.255.255 any access-list 105 deny   ip host 255.255.255.255 any access-list 105 deny   ip host 0.0.0.0 any access-list 105 deny   ip any any log dialer-list 1 protocol ip permit Sorry forgot firewall setting ip name-server 207.164.234.193 ip name-server 207.164.234.129 ip inspect WAAS flush-timeout 10 ip inspect name SDM_LOW cuseeme ip inspect name SDM_LOW dns ip inspect name SDM_LOW ftp ip inspect name SDM_LOW h323 ip inspect name SDM_LOW https ip inspect name SDM_LOW icmp ip inspect name SDM_LOW imap ip inspect name SDM_LOW pop3 ip inspect name SDM_LOW netshow ip inspect name SDM_LOW rcmd ip inspect name SDM_LOW realaudio ip inspect name SDM_LOW rtsp ip inspect name SDM_LOW esmtp ip inspect name SDM_LOW sqlnet ip inspect name SDM_LOW streamworks ip inspect name SDM_LOW tftp ip inspect name SDM_LOW tcp router-traffic ip inspect name SDM_LOW udp router-traffic ip inspect name SDM_LOW vdolive no ipv6 cef Thanks for your help Digish ... View more

Is anyone have any idea why call forwad all is not working? call comes in and says it has been fwded and than hang no other action. pl. help. As well after removing cfwdall still AA answering this extension has been fwded and it ring on right extension!! pl. help yesterday, it was resetting all phones every 15 to 30 mins I had to reload and then it stop doing that. ... View more

I'm installing UC320W for customer and cfwd all is not working? its just hang doesnot go anywhere if anyone can help? As well eventhough cfwd off, when call from outside and dial that extension now it says it has been forwarded!! any one know or facing this? pl. help ... View more