About thauff

thauff · 02-26-2010

Hello, I have not been able to connected my 3750 to my 2821 through the Gi0/1 fixed interface on the 2821. The 2821 has 1 serial interface, 2 fixed Gigabit Ethernet Interfaces and a card with 9 Fastethernet interfaces. The serial is used to connect...

thauff · 03-02-2010

Hello, We were using the 2821 with the 9 port ethernet switch card as the branch office router and switch. We had a need for more ports and aquired a 3750. On the 2821 we have multiple VLANS set up. Throughout our domain, the switches all have the...

thauff · 03-01-2010

More Information:Vlan Config on 2821interface Vlan1 ip address 10.x.x.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip route-cache flow no autostatePort config on 3750interface GigabitEthernet1/0/47 switchport trunk encapsulation...

thauff · 03-01-2010

Thanks everyone for your assistanceStill no joy. Not able to add an IP address on to the interface. I want the VLAN1 traffic to pass back and forth through this interface and to the connected switch. 2821-1#sho run int gi0/1.1Building configuration...

thauff · 02-27-2010

Hello,No I did not get that error when I applied the switchport mode trunk.

thauff · 02-27-2010

Hello,I did create the sub-interface. I wasn't able to assign an IP address to it.2821-1#config tEnter configuration commands, one per line. End with CNTL/Z.2821-1(config)#int gi0/1.12821-1(config-subif)#ip address 10.x.x.6 255.255.255.0% Configuri...

Member Since	‎11-06-2006 07:55 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

Connecting 2821 to 3750

Re: Connecting 2821 to 3750

Re: Connecting 2821 to 3750

Re: Connecting 2821 to 3750

Re: Connecting 2821 to 3750

Re: Connecting 2821 to 3750