Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear members, I just logged on to the firepower management center and noticed that its failing deployment for the below firewall and after taking deeper look I noticed the SFR is stuck in Init mode. I tried to reset, shutdown and reload with no succe...
Hi Guys,Really appreciate your feedback or comments on this pleaseWe have a pair of MX450's (Master-Slave) in our datacenter running in vpn concentrator mode only and acting as a Hub for Spokes (MX67CWW). This is a working setup for years however on ...
Hello Guys,
How do I check the current network sensor version on FMC. I have an ASA 5508-x with software FirePower module and would like to upgrade the network sensor but I want to know the current version the FMC is on.
Thanks
HI guys,Did anyone experience this with MV12W Meraki Camera. It says Cloud Stream Unavailable when using the local LAN connected to Meraki Switch. It's working on the HQ Lan though
Thanks Balaji for your response. The issue seems to have been resolved on its own. I tried to recover,reload and reset without any success just checked the module this morning and its looking up and healthy which is great. I dont know what's resolved...
Thanks Guys.Failover testing was successful this morning and we are back on Hub-A as it was before and Hub-B is acting as Passive;readyWe followed the below plan this morning and had a successful outcome1. Unplug white cable from port3 of both A & B ...
Thanks for your response. Firmware Current version: MX 18.107.2When we unplugged the uplink on B to force the failover to A it has rebooted both devices automatically which is weird
