Cisco Network Sensor Version

[osman.mohd]

Hello Guys, How do I check the current network sensor version on FMC. I have an ASA 5508-x with software FirePower module and would like to upgrade the network sensor but I want to know the current version the FMC is on. Thanks

[balaji.bandi]

from ASA  console you can try :

show module

From FMC

you can go Device --> Device Manangement (you see the sensor version)

some reference commands :

https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/217884-verify-firepower-software-versions.html

[osman.mohd]

Dear Balaji,

Thanks for the swift response.

show module gives me the below information. Is the SFR software version 6.4.0.7-53 same as the network sensor?

Mod Card Type Model Serial No.
---- -------------------------------------------- ------------------ -----------
1 ASA 5508-X with FirePOWER services, 8GE, AC, ASA5508 JAD230505L8
sfr FirePOWER Services Software Module ASA5508 JAD230505L8

Mod MAC Address Range Hw Version Fw Version Sw Version
---- --------------------------------- ------------ ------------ ---------------
1 7488.bb6b.e8e9 to 7488.bb6b.e8f1 3.3 1.1.18 9.16(2)14
sfr 7488.bb6b.e8e8 to 7488.bb6b.e8e8 N/A N/A 6.4.0.7-53

Mod SSM Application Name Status SSM Application Version
---- ------------------------------ ---------------- --------------------------
sfr ASA FirePOWER Up 6.4.0.7-53

Mod Status Data Plane Status Compatibility
---- ------------------ --------------------- -------------
1 Up Sys Not Applicable
sfr Up Up

[osman.mohd]

Can you reply please

[balaji.bandi]

what you said correctly is that is the sensor version.

[osman.mohd · Accepted solution]

Thanks Balaji