Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I've got a series of HREAP Configured AP's that are stationed on mobile carts. The AP's are powered by bricks located on the carts themselves. What I am seeing is that in cases where the cart is powered but there is no ethernet connection to the A...
Hi,I've got a site-to-site vpn that is terminating on my outside interface. I need to have the client traffic that is coming in over that tunnel leave the asa on the same interface. I thought this would be as simple as setting up a default route and ...
Hi,I'm about to drop kick this ASA 5505. Basically what happens is upon install the 5505 connects to the 5520, establishes the tunnel and all is well. Within 10 or 15 minutes, everything drops, and the VPN tunnel refuses to come back up until I reloa...
Anyone here experiencing problems with SSL VPN Split Tunneling and OS X 10.6? I'm using 2.4 and it works flawlessly on my Windows 7 clients but on OS X I've only got access to tunnel hosts and nothing on the internet.Any ideas?Thanks,tim
I'm dealing with this same issue. I'm still trying to get a handle conceptually on how this is working.My setup is a headend 5520 and a remote 5505. Basically I'll have clients attached to the inside interface on the 5505 getting their dhcp addresses...
Hey there,I think you'll want to set the isakmp lifetime to 0 per : http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#solution06Specify the SA lifetime. This examples sets a lifetime of 4 hours (14400 seconds). The d...
