Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Having a problem trying increase vlan20 to have 64 addresses rather than 32 to fit in the following VLAN config
10
Server
10.21.112.0/27
10.21.112.30
255.255.255.224
20
CCTV & SECURITY (DOOR ACCESS)
10.21.112.32/27
10.21.112.62
255.255.25...
Hi /Mohammed thanks for your reply, if I understand that correctly your solution doesn't help, its actually makes the CCTV/Door Access VLAN on a /28 meaning I would only have 16 usable address, I'm trying to make that VLAN larger its currently on a /...
Thanks, nixpengu1n, you seem to of understood my request perfectly, it's kinda annoying that I've got that spare /28 range after IP. 62 will little I can do with except create another /28 range. I think at this stage I might be better off creating an...
Thanks, nixpengu1n for your help so far.
I'm really considering my options - I could always collapse VLAN20 altogether and create a new VLAN with a new IP range as the end of the IP scope - I have the freedom to do this as I'm no longer constrained...
I was under the illusion that the VLAN config on the core was wrong (even though it works)
I had thought it should be set like this
---
interface Vlan1no ip addressshutdown!interface Vlan10description *** Server VLAN ***ip address 10.21.112.0 255...
