Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there,i try to connect a astaro-firewall per l2l-vpn to an asa5510.I got allways the following message.Whats wrong? (cheched the parameters already)RegardsMarcasa %ASA-4-713903: Group = x.x.x.x, IP = x.x.x.x, Freeing previously allocated memory fo...
Hi there,I have got an ASA5510 connected to a 6506.Behind the ASA is an internal network and in the DMZ is a proxy-server.6506 (=GW .137) -> ASA 5510 (outside .141) -> internal | DMZ (static NAT .138 -> 192.168...
Hi,there is a VPN-connection between two sites. Both sites are connected with a 155MBit/s line to internet. They use a PIX 515e with IOS 8.0.2 to handel the VPN. If they transfer a file from one site to the other, the speed is about 1 MByte/s. A seco...
Hi there,I have got an ASA 5510 with IOS 7.0.7.The ASA has two external connections: - External VLAN 5- External VLAN 225 (default route points to the next router)Now i try to connect with a SSL-VPN to the IP, bound on VLAN 5.This does not work. If I...
Hi,there are several other vpn-tunnels.Dynamic maps are located at 65.000ff.The solution with the static map was an cisco-suggestion. With other customers it worked fine.I solved this problem by using 3des and md5 without pfs.Thanx for your adviceMar...
Hi,i have no access to the astaro-firewall.Here is my config:The host on my side must be natted towards the customer.access-list POLICY_NAT extended permit ip host host access-list CRYPTO_MAP extended permit ip host host static (inside,outside) ac...
Hi,here is the configuration.Hope, all neccessary information is included.interface Ethernet0/0.5 description VLAN zum Router vlan 5 nameif outside.5 security-level 0 ip address x.x.x.5 255.255.255.248 !interface Ethernet0/0.225 description VLAN zum ...
