Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are trying to not move our Routing and DHCP to the firewall and in keeping it on the switch level but in doing so, we need to free up ACLs for some additional functionality. So, what we have is our DMZ VLAN with allow / denys for all our internal ...
Tested again this morning with an expanded subnet in one of the server ranges and still have same issue. I did verify I can ping the web server by IP and name from a local subnet but cannot access the IIS content, can remote to the server (from a ser...
I have 122 ACLs in place but sending the last 30 or so for review. Please let me know if you need them all. This is all working as expected from internal VLANs the only issue is from external and only when I do a deny all at the end. Just curious of ...
Allows include that and are on the switch level due to routing and dhcp being at that level. I would rather do all controls at the Firewall but with the routing and dhcp being done on the core stack and static routing in place on the FW I have not be...
