Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,
I am new to cisco and IOS so bear with me. I have just purchased a 24 port catalyst 3750 and am trying to create two VLANs and get them to talk to each other.
VLAN1 is connected to a consumer grade netgear router which is in turn connect...
Hello all!
I am new to cisco IOS and am trying to setup some basic inter vlan routing. I am unable to ping from one vlan to the other. I just recently purchased a 3750 switch and think i'v got it all setup right. Can someone help?
I have the defaul...
Hello all!
I am new to cisco IOS and am trying to setup some basic inter vlan routing. I am unable to ping from one vlan to the other. I just recently purchased a 3750 switch and think i'v got it all setup right. Can someone help?
I have the defaul...
Just FYI for anyone else who stumbles on this...my netgear router...nighthawk R7000 does not support outside subnet NATing supposedly. I posted on the netgear forums and found out that I needed the 3'rd party firmware to get this to work. I put asus...
Thankyou Abzal and Richard!
I added a static route on my netgear to direct 192.168.3.0/24 traffic to the cisco switch, 192.168.1.250. That did the trick for pinging. I should have thought of this, I think my setup is a bit wonky. So let me clarify.
...
SHOW IP ROUTE:
3750switch#show ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 ...
SHOW VLAN BRIEF:
3750switch#show vlan briefVLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Gi1/0/1, Gi1/0/2, Gi1/0/3 ...
