Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Friends,
I am connected to 2 ISPs with 2 different ADSL links attached to my network and I'm trying to create a weighted load balancing on these two links using a cisco router (2811), till now I found nothing useful as all the load balancing tec...
Hi,
I have set up an SSL VPN (anyconnect) on a 2811 IOS router! as I'm using aaa authentication and authorization based on my local DB on the SSL context to authenticate and force policies to the users I've faced some problems.
I need to create some ...
Dear Friends,
I'm struggling with an issue.
I've set up an ssl vpn (Anyconnect) on a cisco 2811 router. Because of certain limitations I can't setup a radius or tacacs server.
my VTY line authentication is aaa login local
I have some questions:
1- ca...
Please clarify if you want to let the users use the internet from their VPN access or the internet on their Local Site:
If you want to route all of their traffic through the VPN tunnel (Not my personal preference) you should try NAT and If you want t...
Dear d.dath,
As I explained 50/50 doesn't work for me and I need weighted load balance like 70/30.
GLBP won't do the trick in this case as the WAN in routed couple of time to reach the access layer.
Best Regards,
Dear Joseph,
I'm talking about 75/25 or 70/30 as the links are not equal a 12mbps and a 4mbps links for backup! If PfR can do the trick I'm open to upgrade my IOS to adventerprise or even upgrade the whole router can you clarify something for me:
1-...
Thanks a million times!!! it worked... I mixed some event triggers like cron, watchdog and countdown to build perfect mechanisms for this system...
I know that branch routers like 2811 are not built for this but first of all I love challenges and b...
